COOLANT GEL FOR EDM WIRE CUT MACHINE
1. Before the first use, please thoroughly clean the cooling system with the right mixed fluid. It is better to open and clean the pump. Please don’t rinse the cooling system with water directly in order to make sure all of the water tubes clean.
2. While mixing, please dilute BM-50 working solution with clean water at a ratio of 1:50(2%) in the water tank. (If you hope to dilute it quickly, we suggest you dissolve BM-5 with a little of hot water firstly, and then put the mixed fluid into the tank, especially in cold days).
3. To make sure the machine works in the best machining condition, please add the right mixture rate fluid into the tank, when the water levels falls down.
Company name: Suzhou Baoma Numerical Control Equipment CO., Ltd
ADD: No.42, Xulian Road, Xuguan Industrial Park,National high-tech.district, Suzhou , China
TEL:(86)-512-65355298 EXT 8085